New Motor Company Advertising

NEW WAY ADVERTISING BOOKLET 
Advertising was always an important part of the New Way Motor Company process of ensuring users had the knowledge for good choice.
If you have a good product why wouldn't you push it's merits through the avenue of the media of the day - by magazine, catalogue or Newspaper to name a few.
Today we have added a booklet which is the result of contributions of owners with original material, TROVE, the National Library of Australia digital archival record from newspapers of Australias past. http://trove.nla.gov.au/
The booklet has been set up so that any page can be framed and can be downloaded free from the Nakido File sharing site at  http://naki.do/NUE.
For availability of other Free downloads visit the New Way Engine Downloads Library page at :
http://newwaystation.blogspot.com/p/documentation.html

If you have some original documentation you can help us with by sharing, please email us at geo.covey@gmail.com
We would love to hear from you.

Regards
George

NEW WAY REGISTERED - MADE in CANADA

It has finally happened a motor from the New Way Canadian plant has been listed on the registry.

THE New Way MOTOR COMPANY OF CANADA

ASSEMBLED IN CANADA

 WELLLAND, ONTARIO

 Model A Type C 3.5 Hp Vertical Air Cooled Engine

HOME NOW  - YES, It still lives in CANADA

It is great to welcome all new owners and their engines to the registry but we all like to see something different come along. This is one of those times. It illustrates the case for getting as many New Way ENGINES  registered that we can so as to expand the knowledge of enthusiasts everywhere. Got a new way - we want to welcome you and your engine aboard. 

NEW WAY SHROUD DECAL - PARTS EXPANDED

SHROUD FINISHING TOUCHES - LARGE DECAL
Today we have added the availability of a Shroud decal to the expanding lineup in the New Way reproduction parts page.
It will allow you to make your restoration just that little more authentic and distinctive as New Way Engines were with all their decorative artworks. {especially flowers}

For detail and photo see the parts page
http://newwaystation.blogspot.com/p/reproduction-parts.html

FREE DOWNLOADS of NEW WAY DOCUMENTATION

GENEROSITY
Thanks to the generosity of Owners of original New Way documentation we have been able to again expand our  services to enthusiasts of New Way Engines.

SERVICE
A new page has been added to allow FREE DOWNLOADS of  New Way printed material to help the enthusiast in their restoration endeavours. As original material comes to hand and time permits the intension is to expand available download material to include many:

• New Way Instruction Manual materials
• New Way Catalogue materials
• New Way Company Advertisements
• New Way Agency Advertisements (Illustrated)
• New Way Company Letters
• New Way Power Plant (Illustrated / Photos) eg Road Plant, Wood splitters, Saw Benches, Rail transporters, tractors, Milking machines.
• ETC.......

Please note if you have original material you are willing to loan/sell to allow us to expand the service please advise us. The condition of material eg fly spotted or dirty and yellowed pages is generally not an issue as with scanning and good photographic software it is amasing how good the results can be. If you are kind enough to loan we take great care of  your documents.

We have recieved and greatly appreciate materials from USA, Canada and Aust..


Generosity is virtually the sole contributor allowing us to expand this aspect of the site. If you can help please  do. eg Anyone with a horizontal twin New Way Manual??? just to mention one that would be really appreciated.

Visit the Download Page  (click) and see what is already available for free download.

NEW WAY Milking Machines

Dairy farm the world - with the the modern New Way.
It is obvious from this 1929 advertisement from one of New Way's key agents W.A Preston that they wanted to push the advantages of  New Way Modern Milking. In its early days Queensland had a thriving dairy industry. New Way  promotes the achievement of  hygene cleanliness with a better product in an area where cleanliness is paramount.
Innovative? Have a read of the advert  - CLICK PHOTO to ENLARGE

NEW WAY MARINE ENGINES

HOME of the New Way Motor Company

Lansing Michigan  - A State on the great lakes of Canada and U.S.A.

It seems though, that the New Way Motor Company  focused their creative juices toward the land in their early years of development of the air cooled engine and it was some time before the water came into focus. While their advertisements show boats shooting the waves in adventurou style in essence though a 5 Hp motor was certainly admirably suited to works and pleasure in rivers and lakes.

The following short newsaper article of 1924 (TROVE) heralds the advent of the New Way Marine engine.

By 1924 New Way was well known in Sth. Aust. with a large following from agriculturalists. In about 15 years from 1907 about 1500 New Way Engines were sold in that state alone such was threir reputation. In J.H. Horwood and Co., New Way had a well respected agent and bore driller who advertised extensively. I expect the expansion to marine application by reputation, would have recieved ready acceptance in the Murray /Darling river systems.  CLICK to EXPAND SIZE

     

New Way Repro.Parts - NEW ITEM

Hi All,

A new New Way reproduction item is now available.

Fan Oil Line Ball Valve reproduction part has been made available and should suit most of the early model New Way vertical engines. For more detail and photo refer the reproduction parts page at http://newwaystation.blogspot.com/p/reproduction-parts.html

 This is in addition to existing available items listed:

• Mufflers
• Shrouds
• Shroud/fan guard
• Fan shaft
• Fan

Happy restoring and an invitation to New Way Owners to register their engines if they haven't already.

geo.covey@gmail.com

SHROUDS, TEMPLATES and DRAWINGS

With nearly 100 engines from 8 countries on the registry, have you seen our Reproduction Parts page (CLICK) - Looking good for the New Way Enthusiast.  Expanding options and availability for enthusiasts, often happening I expect because of generosity and a kindred spirit.

NEXT STAGE
Looking for some old decrepit Shrouds - Ones that are past it but could still be used for a template.

Or - maybe you are willing to share some accurate drawings you've done that others could use to make shrouds. Please let us know so they can be included in the reproduction processes.

The shroud for the 3.5 Hp Type "C" is taken care of - It is the others we need to get into production. Can anyone help. geo.covey@gmail.com

Or - have you had other Reproduction Parts made for a New Way Engine and can provide information that would allow more to be produced. (eg small size (Horizontal) or high volume (4.5Hp) New Way reproduction mufflers)
Or - does anyone know anyone who can produce a replica New Way Oiler and have the New Way Insignia etc stamped on the top brass face. Oilers aren't dear but getting that authentic look comes at a price- most of us are probably looking for authenticity at a reasonable price.

In a nutshell that is what we are trying to achieve. (Guns and roses - fight for spice)

A Future - Be Restored
Geo

REPRODUCTION PARTS

New Way Parts
Just added is a separate page to list New Way reproduction parts. At the present time the New Way spares is confined to 3.5 Hp Type "C" shrouds and 10 inch diameter cast iron mufflers, Fans, Fan shafts and Fan Guards. As of 6 th April, 5 inch diameter cast muffler to fit some of the smaller New Way  Jewels has been added.

It is envisaged this page will expand to allow enthusiasts to procure good reproduction parts where the original is not available or badly damaged and can be templated.

We would like to have reproduction Oilers with New Way stamping available if a supplier can be found.

Have a look at the details and photos on the Reproduction Parts (CLICK) page.

REGISTERED MOTOR CHARTS

REGISTRY CHARTS

These charts current as of 28/Feb are also included with the latest on the actual registry page (click) where all motors are individually listed.

For those without an actual registry interest it is provided here as a once off and gives a basic overview to possibly determine New Way Engine rarity and show diversity in New Ways production. Note some models still have no representation on the registry. For up to date information please go to the Registry.

Have a motor thatyou haven't registered - we invite you.   Email geo.covey@gmail.com

The second chart shows registrations by NATION.

First CHART looks at MOTOR Series/Model/Type by HP and shows how many of each are registered.

Example - On the highest column at the top block are 8 Vertical Type "C" of 4.5Hp

MOTORS - Column grouped by Series/Model/Type

     .........................................................................................................................................................................................................................

NEW WAY - Art Works

Monet's Art - A New Way

Artwork and decoration played a definite role in the early days on New Way Motor Company production. It was part of a "Looking Good" philosophy that was promoted along with a quality product. I guess it comes down to the fact that you're more likely to buy, if proud of what you're buying. Decorate with flowers - then for sure wives will love it too. Now that's good sales psychology for sure - a little beauty for the beast.

Flower Power - The soft touch of petal on your New Way's classic iron. 

Original Art for those chasing Authenticity

More Photos to come. Recognise the one below

Weaving the Web - Original Artworks also by New Way 

New Way I D - Art on a PLATE

a NEW WAY of seeing a New Way 3.5Hp

NEW WAY - Mixers and Carburettors

MIXERS - Fitted to early Hit Miss engines. These were little more than a tube with a fuel orifice or an orifice and a metering needle. Adjustment for efficiency and good economy with such simplicity was achievable because the mixture volume on power intake was relatively constant.

• Examples where fitted - Little Giant, Jewels, Type C, Type D,

Photos below show a Type C mixer (1st 2 are top view) - there is no metering needle. The bottom photo shows the fuel delivery system that screws onto the mixer fuel inlet thread.

Click Photo for enlarged view

CARBURETTORS - Fitting of carburettors commenced about the same era as the introduction of the Series F Motors with their single Flywheel and could generally be directly associated with the use of throttle governors. Some carburettors could be regarded as dual fuel being designed to start on petrol and run on the likes of kerosene.

• New Way - Carburettor Manufacturers
  (a) Holley - Holley were fitted to later model New Ways. I expect this was from the introduction of throttle governed engines to their range. These  photos depict an example of a Holley that was apparently fitted to a New Way motor. These were fitted to the Model D type F (c 1916) and probably others.

 Click Photo for enlarged view
(b) Tillotson - fitted to Motors BH, CH, DH, EH, GH in years 1927-1931. For details of carburettor
  models and actual motor and years fitted refer to the Antique Small Engine Collectors Club site at http://www.asecc.com/data/tillotson.html
(c) New Way - Carburettors  designed  to  run  on  kerosene  were fitted to some Series "M" engines.
I believe these were a new way carburettor. Note how the exhaust is basically fed via the carburetor
to heat the fuel before exiting through the wine glass muffler.

Operational Instructions

Click Photos for enlarged version 

NEW WAY Governors

GOVERNING GENERAL

New Way used two principle methods to govern their Motors. Early models were "Hit and Miss" and later  throttle governed. As a general rule for motor manufacturers of the era, the actuating force for control is centrifugal force. The principle of operational control for these two systems is vastly different.

A possible exception was the single cylinder verticals (BH and FH) that used an Air Governor. 

New Way Hit Miss Governed Engines included Little Giant, Jewels, Vertical Type "C", Vertical type "D", Horizontal twins, Horizontal Standard and some vertical Series "M".

• Hit Miss Governor  - the mixture volume is essentially fixed and speed governed by controlling its intake frequency and consequently the firing of the mixture. Loading the motor means the revs tend to drop off, the exhaust valve is allowed to close by the governor, fuel/air is taken in and fired to again increase the revs to set RPM. An intake mixture "Hit" may drive the motor over several "Miss"cycles until another Hit is required to maintain revs. Exhaust Valve operation is the primary control since the mixer/carburetor is always fully open (ie equivalent to full throttle) . 
• Early Model Adjustment - Motor Revs. control - Made by evenly adjusting 2 screws at the centre of the governor flywheel to vary spring load pressure and effect the travel of governor weights for controlling the latching of the exhaust valve. Higher the spring loading the higher the revs before the governor cuts in.

Throttle governed engines were produced from about the mid teens (1900) and included some Vertical Series "M". I believe throttle governing applied to models BH(A), CH(A), DH(A), FH(A), EHA and GHA. These were the physically small, flywheel fan, single and Twin cylinder vertical engines ranging in size from 3 to 10 Hp.

• Throttle Governors - the mixture volume is varied generally by a centrifugally actuated throttle control for the carburettor which gives finer control on the governed speed of the motor than is possible with the Hit Miss process. The throttle merely varies the volume of intake mixture which directly effects the volume of fuel and therefore speed. Loading the motor means speed drops off, the throttle is opened and therefore more fuel and air is supplied to maintain revs through all intake strokes. Throttle position is the primary control.

Restorers - I am looking for model specific tips or help for any of the throttle governors / engines to publish for others to use in their projects. Detail on the Air governor operation also appreciated.